Display Wall
Our iDisplay(TM) driver software enables convenient and inexpensive setup of display walls using a single PC running on regular Windows 7/8/8.1/10, currently supported are DisplayLink’s DL1XX and Microchip’s UFX6000/7000 based devices. Please click iDisplay for download and installation instructions.
Before installing, please make sure all prior versions of our drivers are uninstalled. Reboot is required after uninstalling.
Reboot is also required after installation.
In addition, the following registry configuration allows more than 16 displays.
Here is an example of how we can configure 4 displays to a 2x2Wall0 and another 4 displays to a 2x3Wall1 (note 2 displays is missing from this wall) plus a group of 2 mDisplays. Also each Wall display can be customized with Width, Height, Rotation, OriginX and OriginY as shown in the example.
Config2DisplayWalls.reg can be downloaded by clicking here.
Config2DisplayWallsWithRotations.reg can be downloaded by clicking here.
Resolution control can be done via global level, per wall level or per device level.
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\iDISPLAY]
“DisplayWidth”=dword:00000500
“DisplayHeight”=dword:00000400
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\WDISPLAY]
“WallCount”=dword:00000002
“WallDisplayHeight”=dword:00000300
“WallDisplayWidth”=dword:00000400
“WallHeight”=dword:00000620
“WallWidth”=dword:00000820
“BezelWidth”=dword:00000020
“BezelHeight”=dword:00000020
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\WDISPLAY\Wall0]
“WallDisplayRow”=dword:00000003
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\WDISPLAY\Wall1]
“WallDisplayWidth”=dword:00000780
“WallDisplayHeight”=dword:00000438
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\WDISPLAY\Wall0]
“WallDisplayRow”=dword:00000003
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\iDISPLAY\DeviceMap]
“USBROOT_HUB_GENERICREV_02015D05BB5D”=dword:80000010 <=== 2x2Wall0
“USBROOT_HUB_GENERICREV_02015D05BB8C”=dword:80000020 <=== 2x2Wall0
“USBVID_0424PID_9D010140416050″=dword:80000030 <=== 2x2Wall0
“USBVID_0424PID_9D010140422002″=dword:80000001 <=== 2x3Wall1
“USBVID_0424PID_9D010140416015″=dword:80000011 <=== 2x3Wall1
“USBVID_0424PID_9D0100000009A7″=dword:80000021 <=== 2x3Wall1
“USBVID_0424PID_9D01014041601A”=dword:80000000 <=== 2x2Wall0
“USBROOT_HUB_GENERICREV_020198000B07″=dword:80000031 <=== 2x3Wall1
“USBVID_17E9PID_4132UHBA1509025651″=dword:40000000 <=== M0
“USBVID_17E9PID_03AADSGC8JA000895″=dword:40000000 <=== M0
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\iDISPLAY\DeviceMap\USBROOT_HUB_GENERICREV_02015D05BB5D]
“Width”=dword:00000500
“Height”=dword:00000400
“Rotation”=dword:00000000 <=== 0 degree rotated, origin is at top left corner
“OriginX”=dword:00000438
“OriginY”=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\iDISPLAY\DeviceMap\USBVID_0424PID_9D01014041601A]
“Width”=dword:00000780
“Height”=dword:00000438
“Rotation”=dword:0000005A <=== 90 degree rotated, origin is at bottom left corner
“OriginX”=dword:00000000
“OriginY”=dword:00000780
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\iDISPLAY\DeviceMap\USBVID_0424PID_9D010140422002]
“Rotation”=dword:000000B4 <=== 180 degree rotated, origin is at bottom right corner
“OriginX”=dword:00000438
“OriginY”=dword:00000780
[HKEY_LOCAL_MACHINE\SOFTWARE\OSBASE\iDISPLAY\DeviceMap\USBVID_0424PID_9D010140416015]
“Rotation”=dword:0000010E <=== 270 degree rotated, origin is at top right corner
“OriginX”=dword:00000870
“OriginY”=dword:00000000
Tested Products:
HP Compaq L2311c 23-inch Notebook Docking Monitor
HP MultiSeat T100, T150 and T200 Zero Clients, LD4730, LD4730G, LD4735, LD5535, B421
ViewSonic® VMA10, VMA15, VMA20 and VMA25
Philips 221S3UCB USB Monitor
Lenovo Lenovo USB 2.0 Port Replicator
Centerm C75 and CT200
ThinGlobal MiniPoint Ethernet
Lenkeng LVV376 PC to HDMI over LAN